KODAK EASYSHARE DX3700 Digital Camera — User's Guide

Table of Contents > Transferring Pictures To Your Computer > Connecting to Your Computer

---

6 Transferring Pictures To Your Computer

Connecting to Your Computer

You can transfer your pictures from your camera to your computer using either the provided USB cable or the optional KODAK EASYSHARE Camera Dock.

Connecting With the USB Cable

		1. Turn the camera off.
		2. Plug the labeled ( ) end of the USB cable into the labeled USB port on your computer. If the port is not labeled, see your computer User's Guide.
		3. Plug the other end of the USB cable into the labeled USB port on the camera.
		4. Turn the camera on.

Connecting With the EASYSHARE Camera Dock

		1. Install the Dock insert. Place the front tabs of the insert into the slots in the EASYSHARE Camera Dock cavity. Fit the insert down into the cavity and snap the insert into place.
		2. Open the connection door on the bottom of the camera.
		3. Place the camera in the EASYSHARE Camera Dock.
		4. Push the Connect button. You can transfer files while the green light is blinking.
		For more information, see Using the EASYSHARE Camera Dock.

Previous Next