KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide


Table of Contents > Taking Pictures > Taking Pictures in Night Mode

2 Taking Pictures

Taking Pictures in Night Mode

Use this mode for night scenes or low light conditions. The flash illuminates close subjects. A longer exposure captures more detail of background subjects. The Low Light Auto Focus LED (see Using the Low Light Auto Focus LED) turns on as needed to assist with focus and capture in low light.

NOTE: To avoid blurry pictures caused by slow shutter speed, place the camera on a flat, steady surface or use a tripod.


  1. Turn the Mode dial to .

The LCD displays a mode description. To interrupt the description, press .

  2. Press the Shutter button half-way to set the exposure and focus.

  3. When the ready light glows green, continue pressing the Shutter button completely down to take the picture.

The ready light blinks green while the picture is saved.


Default flash setting:

Auto

Available flash settings:

Auto, Flash Off, Fill Flash, Red-eye

Camera returns to default:

When you change modes or turn off the camera.



Previous Next