KODAK EASYSHARE LS443 Zoom Digital Camera — User's Guide

Table of Contents > Taking Pictures > Using the Auto Focus Framing Marks

---

2 Taking Pictures

Using the Auto Focus Framing Marks

For the best possible pictures, the camera attempts to focus on foreground subjects (even if the subjects are not centered in the scene).

NOTE:

Auto Focus framing marks appear only when the LCD is turned on. Framing marks do not appear in Landscape mode. When the focus is set to Center Zone, focus is fixed at Center wide (see Setting Focus Zone).

1. In any Still mode (except Landscape), press the OK button.

   The LCD turns on.
   
   

2. Press the Shutter button half-way to set the exposure and focus.

   The Auto Focus framing marks depict the main focus area or areas. If the camera is not focusing on the desired subject (or if the framing marks disappear), release your finger, recompose the scene, and repeat Step 2. When the framing marks turn red, focus is accomplished.
   
   

   While Shutter Button is Pressed Half-way
   	Center focus
   	Center wide focus
   	Side focus
   	Center and side focus
   	Left and right focus

3. Continue pressing the Shutter button completely down to take the picture.

Previous Next