KODAK EASYSHARE DX4330 Zoom Digital Camera — User's Guide

Table of Contents > Appendix > Tips, Safety, Maintenance

12 Appendix

Always follow basic safety precautions. Refer to the "Important Safety Instructions" booklet packed with your camera.
Do not allow any chemicals, such as suntan lotion, to come into contact with the painted surface of the camera.
If the camera has been subjected to inclement weather or you suspect water has gotten inside the camera, turn off the camera and remove the battery and card. Allow all components to air-dry for at least 24 hours before using the camera again.
Clean the lens and back LCD:
1. Blow gently on the lens or LCD to remove dust and dirt.
2. Moisten the lens or LCD by breathing lightly on it.
3. Wipe the lens or LCD gently with a soft, lint-free cloth or an untreated lens-cleaning tissue.
Do not use cleaning solutions unless they are designed specifically for camera lenses. Do not wipe the camera lens or LCD with chemically treated eyeglass lens tissue. It may scratch the lens.
Wipe the outside of the camera with a clean, dry cloth. Never use harsh or abrasive cleaners or organic solvents on the camera or any of its parts.
Service agreements are available in some countries. Contact a dealer of Kodak products for more information.
For digital camera disposal or recycling information, please contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the Kodak Web site at www.kodak.com/go/dx4330support.

Previous Next