Kodak EasyShare printer dock 6000 — User's Guide
Table of Contents > Getting Started with Your Printer Dock > Connecting the Power
1 Getting Started with Your Printer Dock
Connecting the Power
CAUTION: Use only the AC adapter and power cord included with the printer dock. Other adapters and cords can damage your camera, printer dock, or computer. |
IMPORTANT: | Remove your camera from the printer dock when you are connecting power. |
|
1.
Connect the AC power cord to the adapter, then to the back of the printer dock.
|
||
2.
Connect the AC power cord into a power outlet.
|
|||
3.
Route the cable along the channels located on the underside of the printer dock, so that the cable does not interfere with the paper path.
|
Previous Next