Kodak EasyShare printer dock 6000 — User's Guide
Table of Contents > Printing Without a Computer > Printing from Your Camera
3 Printing Without a Computer
Printing from Your Camera
1.
Make sure the AC power cord is connected and the color cartridge and paper are loaded (see Getting Started with Your Printer Dock).
|
|||||||
2.
Take a picture with your camera.
|
|||||||
|
4.
On the printer dock, press the Print Mode button to change print modes:
|
||||||
|
5.
Press the Print button.
The copy screen appears on your camera when current mode is highlighted on your printer dock. Use the arrow keys on the printer dock to select the number of copies to print, then press the Print button again. Printing starts.The paper cycles four times during the printing process before the finished print is ejected. Each of the first three passes places a layer of color (cyan, yellow, and magenta). The fourth pass places a clear coating that protects and preserves the image quality. |
CAUTION: Wait until printing is complete before removing prints, the paper tray or the camera. Failure to do so can cause paper misfeeds or jams and can damage the printer dock. |
Previous Next