Kodak EasyShare printer dock 6000 — User's Guide

Table of Contents > Care and Maintenance > Cleaning the Print Head

---

6 Care and Maintenance

Cleaning the Print Head

Clean the print head when lines, streaks, or scratches appear on the prints. The head cleaning tool can be used several times, but should be replaced when the cleaning pad appears soiled or is no longer effective. Replacement cleaning tools are available at www.kodak.com/go/printerdock.

Use the print head cleaning tool to clean the print head.

		1. Disconnect the power cord.
		2. Open the color cartridge door.
		3. Push up on the green lever and remove the color cartridge.
		4. Insert the cleaning tool, white pad facing up, into the color cartridge slot. IMPORTANT: Do not touch or remove the white cleaning pad on the cleaning tool. The cleaning tool can only be inserted one way. Do not force it into the slot.
		5. Reinsert and remove the tool at least 3 to 4 times.
		6. Reinstall the color cartridge (see Loading the Color Cartridge).
		7. Close the color cartridge door.

Previous Next