KODAK EASYSHARE CX4200 Digital Camera — User's Guide


Table of Contents > Getting Started > Setting the Clock

1 Getting Started

Setting the Clock

The Date & Time screen appears the first time you turn on the camera or if the battery is removed for an extended time. If this is the first time the camera has been turned on, go to step 4.

To set the date and time after that:


  1. In Capture or Review mode, press the Menu button.

  2. Highlight Setup Menu , then press the OK button.

  3. Highlight Date & Time , then press the OK button.

The date format is YYYY/MM/DD in a 24-hour format.

  4. Press to move through the fields. Press to adjust the settings.

  5. Press the OK button to accept the changes.

  6. Press the Menu button to turn off the menu.

The setting remains until you change it.

NOTE: Depending on your computer operating system, KODAK EASYSHARE Software may allow your computer to automatically update the camera clock when you connect the camera. See the KODAK EASYSHARE Software Help for details.



Previous Next