KODAK EASYSHARE CX4200 Digital Camera — User's Guide

Table of Contents > Taking Pictures—Capture Mode > Taking a Picture

2 Taking Pictures—Capture Mode

Before you take a picture, make sure your picture storage location is set the way you want it (see Choosing Internal Memory or MMC/SD Card).


		1. Use the Viewfinder to frame your subject. (Or press the OK button to turn on Liveview. See Liveview—Using the LCD to Frame Your Subject.)
		2. Press the Shutter button half-way down to set the exposure.
		3. Press the Shutter button completely down to take the picture. The ready light blinks green while the picture is saved. The ready light blinks orange if the flash is recharging or if there is an auto-exposure error.

CAUTION:
Do not insert or remove a card when the green ready light is blinking. It may damage your pictures, card, or camera.

Previous Next