KODAK EASYSHARE CX4200 Digital Camera — User's Guide


Table of Contents > Taking Pictures—Capture Mode > Taking Close-up Pictures

2 Taking Pictures—Capture Mode

Taking Close-up Pictures

The Close-up setting helps you gain sharpness and detail at close range. The Close-Up focus distance is 7.9 to 11.8 in. (200 to 300 mm).


To turn on Close-up:
  1. Make sure the camera is in Capture mode.

  2. Locate the Close Up control on the side of the camera, , then move the switch to the On position.

The Close-up icon appears in the status bar and the LCD automatically enters Liveview.

  3. Use the LCD to frame your subject and take the picture as usual.

NOTE: If the flash is set to Red-eye when you turn on Close-up, the flash setting changes to Auto; the flash then changes back to Red-eye when you turn off Close-up. If you change the flash setting while in Close-up, the new setting remains when you turn off Close-up.



Previous Next