KODAK EASYSHARE CX4200 Digital Camera — User's Guide


Table of Contents > Using the KODAK EASYSHARE Camera Dock II > Docking the Camera

8 Using the KODAK EASYSHARE Camera Dock II

Docking the Camera

When you are ready to transfer your pictures from the camera to the computer, or charge the Battery Pack, place the camera in the Camera Dock.


  1. Turn off the camera.

  2. On the camera bottom, slide the connector cover open.


  3. Place the camera in the Camera Dock and push down to seat the connectors.

The Power/Transfer light glows green when the camera is properly seated.

The camera is now powered by the Camera Dock instead of the camera batteries.

NOTE: If the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack is in the camera, the Camera Dock immediately begins charging (see Charging the Battery Pack).



Previous Next