Kodak EasyShare DX6340 zoom digital camera — User's Guide

Table of Contents > Using the Camera Dock 6000 > Installing the Rechargeable Battery

---

9 Using the Camera Dock 6000

Installing the Rechargeable Battery

You received a non-rechargeable CRV3 starter battery with your camera. To take full advantage of your camera dock 6000, replace the CRV3 battery with the Kodak EasyShare Ni-MH rechargeable battery pack that is packaged with the camera dock.

		1. Open the battery door on the bottom of the camera.
		2. Install the Ni-MH rechargeable battery pack as illustrated. CAUTION: The battery pack can only be inserted into the camera in the orientation shown. If the battery pack does not easily install, reposition it and try again. DO NOT FORCE IT. Doing so can damage your camera.
		3. Close the battery door.

IMPORTANT:

The battery pack is not charged when you receive it. See Charging the Battery for charging instructions.

Previous Next