Kodak EasyShare DX4530 zoom digital camera — User's Guide


Table of Contents > Getting Started > Turning On the Camera

1 Getting Started

Turning On the Camera


  1. Remove the lens cap.

If you do not remove the lens cap, it comes off automatically when you turn on the camera.

  2. Turn the Mode dial from Off to any other position.

The ready light blinks green while the camera performs a self-check.

When the ready light glows steady green, the camera is ready to take pictures (or videos, if the mode dial is set to ).

In Still and Video modes, a status area appears on the camera screen.

Changing the Display

To

Do This

Turn Liveview on so that the camera screen can be used as a viewfinder

Press the OK button. To turn it off, press the OK button again.

Change the Liveview setting so that it is on whenever the camera is on

See Turning On Liveview In Still Modes.

Turn the status area back on after it times out

Press .

Turn off the camera

  1. Turn the Mode dial to Off.

    The camera completes operations that are in process.

  2. Replace the lens cap.



Previous Next