Kodak EasyShare DX6490 zoom digital camera — User's Guide
Table of Contents > Troubleshooting > Mode Light Status
10 Troubleshooting
Mode Light Status
Status | Cause | Solution |
---|---|---|
Mode light is on: green in Auto mode ; white in all other modes. |
Camera is on; ready to take a picture or video. |
Camera is operating normally. |
Mode light does not turn on and the camera does not work. |
Camera is not turned on. |
Turn on the camera (Turning On the Camera). |
Battery is exhausted. |
Recharge the battery (Charging the Battery) or install a new one (Loading the Battery). |
|
Mode dial was on when battery was reloaded. |
Turn Mode dial off, then back on. |
|
Mode light is blinking. |
Camera was turned off while a picture is being processed and saved. |
Camera is operating normally. Processing is completed before power off. Do not remove the card while the light is blinking. |
Camera has been turned on and is performing a self-check. |
Camera is operating normally. Begin taking pictures when the light stops blinking. |
|
The internal temperature of the camera is too high for the camera to operate. |
Leave the camera off for several minutes, then turn it back on. If the message reappears, contact Customer Support (Telephone Customer Support). |
|
Battery is low or exhausted. |
Recharge the battery (Charging the Battery) or install a new one (Loading the Battery). |
|
Camera is connected to computer, USB connection is active. |
Camera is operating normally. |
Previous Next