Kodak EasyShare CX7300 digital camera — User's Guide


Table of Contents > Getting started > Storing pictures and videos on an SD/MMC card

1 Getting started

Storing pictures and videos on an SD/MMC card

Your camera has 16 MB of internal memory. You can purchase optional SD/MMC cards for removable, reusable image storage for pictures and videos. Purchase this and other accessories at a dealer of Kodak products. Visit www.kodak.com/go/cx7300accessories.

CAUTION:
Cards should only be inserted as explained below. If inserted incorrectly, the door won't close, and forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera.

To insert an SD/MMC card:
  1. Turn off the camera.

  2. Open the card door.

  3. Orient the card as shown.

  4. Push the card into the slot to seat the connector.

  5. Close the door.

To remove the card, turn off the camera, open the door, then pull the card out.

To set the image storage location, see . For SD/MMC card storage capacities, see Image storage capacities.



Previous Next