Kodak EasyShare CX7430 zoom digital camera — User's guide

Table of Contents > Getting started > Storing pictures on an SD/MMC card

---

1 Getting started

Storing pictures on an SD/MMC card

Your camera has 16 MB of internal memory. You can purchase optional SD/MMC cards for removable, reusable storage for your pictures and videos.

CAUTION: The card can only be inserted one way; forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera.

		To insert an SD/MMC card:
		1. Turn off the camera.
		2. Open the card door.
		3. Orient the card as shown on the camera body.
		4. Push the card into the slot to seat the connector.
		5. Close the door.

To remove the card, turn off the camera. Push the card in, then release it. When the card is partially ejected, pull it out.

See Storage capacities for storage capacities. Purchase SD/MMC cards at a dealer of Kodak products or www.kodak.com/go/cx7430accessories.

Previous Next