Kodak EasyShare DX7590 zoom digital camera — User's guide


Table of Contents > Taking pictures and videos > Taking a video

2 Taking pictures and videos

Taking a video

NOTE: You can change optical zoom before (but not during) video recording.

  1. Turn the Mode dial to Video .

  2. Press the Menu button. Move the Joystick to highlight Video Size, then press the OK button.

  3. Move the Joystick to highlight the desired Size, then press the OK button.

  4. To eliminate camera noise during recording, turn off Continuous AF (see ).

  5. Use the EVF or LCD screen to frame your subject. (Press the EVF/LCD toggle button to switch to the other screen, see Changing the display, EVF or LCD .)

  6. Press the Shutter button completely down and release. To stop recording, press and release the Shutter button again.

  7. During recording, REC blinks on the screen and the elapsed time is displayed.

NOTE: If you prefer, press the Shutter button completely down and hold it for more than 2 seconds to begin recording. To stop recording, release the Shutter button. Recording also stops if the storage location is full. See Video storage capacity for video storage capacities.



Previous Next