Kodak EasyShare DX7590 zoom digital camera — User's guide

Camera does not turn on

• Remove battery and verify that it's the correct type, then reinsert it.

• Insert a charged battery.

• Place the camera on a Kodak EasyShare camera or printer dock (sold separately), then try again.

• Connect the camera to a Kodak 5-volt AC adapter (sold separately), then try again. See Inserting the battery for more battery information.

Camera does not turn off and the lens does not retract

Camera buttons and controls do not function

Lens does not extend when camera turns on or does not retract

• Confirm that the battery in camera is charged.

• Turn camera on and off again.

• If problem still exists, get help (see Camera ).

EVF/LCD screen is black or does not turn on

• Remove the lens cap.

• Push the EVF/LCD toggle button to change display.

In Review, a blue or black screen is displayed instead of a picture

• Transfer the picture to the computer.

• Transfer all pictures to the computer (see Transferring and printing pictures).

• Take another picture. If problem still continues try internal memory and/or another memory card.

Pictures remaining number does not decrease after taking a picture

• Continue taking pictures. The camera is operating normally.

(The camera estimates the number of pictures remaining after each picture is taken, based on picture size and content.)

Picture orientation is not accurate

• Set the Orientation Sensor to ON ().

Flash does not fire

• Open the flash unit (Using the flip-up flash).

• Check the flash setting and change as needed (Using the flip-up flash).

Storage location is almost or entirely full

• Transfer pictures to the computer (Transferring and printing pictures).

• Delete pictures from the card or insert a new one (Storing pictures on a SD or MMC card).

• Change image storage location to internal memory ().

Battery life is short

• Wipe the contacts with a clean, dry cloth (Tips, safety, maintenance) before inserting a battery in the camera.

• Insert a charged battery (Charging the battery).

You cannot take a picture

• Turn the camera off, then on again.

• Depress shutter button all the way (Taking a picture).

• Insert a charged battery (Charging the battery).

• Wait until the AF/AE indicator turns green before attempting to take another picture.

• Memory full. Transfer pictures to the computer (Transferring and printing pictures), delete pictures from the camera (Deleting pictures and videos) or card, change image storage location, or insert a new card.

Error message appears on EVF/LCD screen

• Turn the camera off.

• Remove memory card from the camera.

• Remove the battery and wipe the contacts with a clean, dry cloth (Tips, safety, maintenance).

• Reinstall the battery.

• Turn on the camera.

• If all else fails, get customer support help (see Telephone customer support).

Memory card not recognized or camera freezes with card.

• Card may be corrupted. Format card in camera (see Storing pictures on a SD or MMC card).

• Use another memory card.