Kodak EasyShare CX7525 zoom digital camera — User's guide
Table of Contents > Getting started > Storing pictures on an SD or MMC card
1 Getting started
Storing pictures on an SD or MMC card
Your camera has 16 MB of internal memory. You can purchase optional SD or MMC cards for removable, reusable storage for your pictures and videos.
| NOTE: | We recommend Kodak SD or MMC cards. Other SD brands are acceptable, but must possess the SD  logo. (The SD logo is a trademark of the SD Card Association.) When using the card for the first time, format it in this camera before taking pictures (see ). |
|
CAUTION: The card can only be inserted one way; forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera. |
|
|
|
|
|
To insert an SD or MMC card: | ||
|
1.
Turn off the camera.
|
|||
|
2.
Open the card door.
|
|||
|
3.
Orient the card as shown on the camera body.
|
|||
|
4.
Push the card into the slot to seat the connector.
|
|||
|
5.
Close the door.
|
|||
To remove the card, turn off the camera. Push the card in, then release it. When the card is partially ejected, pull it out.
See Storage capacities for storage capacities. Purchase SD or MMC cards at a dealer of Kodak products or www.kodak.com/go/cx7525accessories.
Previous Next