Kodak EasyShare printer dock series 3 — User's Guide


Table of Contents > Printing without a computer > Printing from a Kodak card reader

3 Printing without a computer

Printing from a Kodak card reader

The Kodak EasyShare printer dock series 3 is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock; however, other manufacturers' card readers are not supported.

  1. For best results, tag pictures on your memory card for printing (see Tagging pictures for printing or your camera user's guide). If you do not tag pictures on your memory card, you will have the option of printing only the most recent picture on the card.


  2. Plug the USB connector from the card reader into the USB connector located on the side of the printer dock.

NOTE: If the card reader is already plugged in but the connection is no longer available, disconnect then reconnect the USB cable to re-establish the connection.

  3. Insert the memory card into the card reader (see your card reader user's guide for details). Do not insert more than one card at a time.

  4. Press to begin printing, or press to cancel.

Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.



Previous Next