Kodak EasyShare printer dock plus series 3 — User's Guide

Table of Contents > Printing without a computer > Reducing red eye in your prints

---

3 Printing without a computer

Reducing red eye in your prints

The Kodak EasyShare printer dock plus series 3 incorporates technology that automatically detects red eye in your subjects, and lets you correct your prints with push of a button.

To reduce red eye in your printed pictures:

• When setting up a print job, press the Red Eye Reduction button, , before pressing the Print button.

  Red eye reduction is applied to any images that were captured using the flash on your digital camera.
  
  

To turn red eye reduction default to always on:

• Press and hold the Red Eye Reduction button for 5 seconds.

  The Red Eye Reduction light blinks, then glows steady.
  
  

  Repeat to turn the default to always off.

NOTE:

The Red Eye Reduction button is disabled when printing from a computer. If printing from a computer (see Printing from a computer), use the Kodak EasyShare software on your computer. Printing time may slightly increase when using red eye reduction.

Previous Next