Kodak EasyShare V570 dual lens digital camera — User's guide


Table of Contents > Doing more with your camera > Using optical zoom

4 Doing more with your camera

Using optical zoom


  1. Use the LCD to frame your subject.

When you turn on the camera, it is set to ultra-wide (23 mm) for the widest field of view.

  2. Press Telephoto (T) to zoom.

The zoom indicator shows the zoom status. The slider pauses at the top of the ultra-wide range (38 mm).

  • To zoom into optical zoom range (39-117 mm), release Telephoto (T) and press it again.

  • To zoom out, press Wide Angle (W).

  3. Take the picture or video.

NOTE: Optical zoom is effective when the lens is no closer than: 24 in. (60 cm) 11.8 in. (30 cm) in telephoto close-up/macro mode 2 in. (5 cm) in wide close-up/macro mode 31.5 in. (80 cm) in ultra-wide

Using digital zoom

Use digital zoom in any picture-taking mode to get up to 4X magnification beyond optical zoom. (You cannot use digital zoom for video recording.)

  1. Press Telephoto (T) until the slider is at the top of the optical zoom range. Release Telephoto (T), then press it again.

  2. Take the picture.

    NOTE: You may notice decreased image quality when using digital zoom. The slider pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.

Understanding the dual lens icon

The dual lens icon is briefly displayed when you enter or exit the ultra-wide angle range.



Previous Next