Kodak EasyShare V570 dual lens digital camera — User's guide
Table of Contents >
Troubleshooting > Picture quality problems
5 Troubleshooting
Status
|
Solution
|
Picture is not clear
|
-
To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.
-
Clean the lens (Additional care and maintenance).
-
Make sure the camera is not in Close-Up/Macro mode if you are more than 21 in. (0.7 m) from your subject.
-
Place the camera on a flat, steady surface or use a tripod (especially in high-zoom settings or in low light).
|
Picture is too dark
|
-
Use Fill flash (Changing the flash settings) or change your position so light is not behind the subject.
-
Move so that the distance between you and the subject is within the effective flash range ().
-
To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.
-
Before taking a picture, use the histogram to evaluate scene brightness (Using the histogram to view picture brightness). In Auto and SCN-Custom modes, adjust the Exposure Compensation.
|
Picture is too light
|
-
Turn the flash off (Changing the flash settings).
-
Move so that the distance between you and the subject is within the effective flash range ().
-
To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.
-
Before taking a picture, use the histogram to evaluate scene brightness (Using the histogram to view picture brightness). In Auto and SCN-Custom modes, adjust the Exposure Compensation.
|
Previous
Next