Kodak EasyShare G610 printer dock — User's guide

Table of Contents > Getting started > Connecting the power

---

1 Getting started

Connecting the power

RISK OF ELECTRIC SHOCK: Use only the AC power adapter included with your printer dock. Other adapters or cords can damage your camera, printer dock, or computer.

		1. Make sure your camera is not docked on the printer dock.
		2. Connect the AC power cord to the AC power adapter, then to the back of the printer dock. NOTE: The AC power adapter included with your printer dock may not require assembly and may be different from the one shown.
		3. Connect the AC power adapter into a power outlet. The printer dock turns on. IMPORTANT: Keep the cables clear of the paper path to the front and rear of the printer dock.

Purchase an AC power adapter and other accessories at www.kodak.com/go/accessories.

IMPORTANT:

When traveling, verify that your AC power adapter is compatible in the region to which you are traveling.

Previous Next