Kodak EasyShare G610 printer dock — User's guide


Table of Contents > Maintenance and firmware upgrade > Cleaning the paper-feed rollers

6 Maintenance and firmware upgrade

Cleaning the paper-feed rollers

To prevent misfeeds and to make sure your prints look their best, inspect the paper-feed rollers weekly for debris particles, and clean, if necessary.

IMPORTANT: Unplug the power before cleaning the paper-feed rollers.

  1. Remove the paper tray from the printer dock, and leave the paper tray door open.

  2. Lightly moisten a lint-free cloth with water. (Do not use cotton swabs, harsh or abrasive cleaners, or organic solvents.)

  3. Gently wipe clean the surface of the paper-feed rollers.


  4. Advance the paper-feed rollers using the moistened lint-free cloth, as necessary, and continue cleaning.

  5. Allow the paper-feed rollers to fully dry before reconnecting the power and inserting the paper tray.



Previous Next