Kodak EasyShare M1063/MD1063/MX1063 digital camera — Extended User Guide

> Taking pictures/videos > Taking a picture

---

2 Taking pictures/videos

Taking a picture

Reviewing the picture just taken

After you take a picture or video, the LCD displays a quickview for approximately 10 seconds. (To exit the quickview sooner, press the Shutter button halfway.)

To review pictures/videos anytime, see Reviewing pictures/videos.

Using the framing marks

Framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.

		1. Press the Shutter button halfway. When the framing marks turn green, focus is accomplished.
		2. If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button and recompose the scene.
		3. Press the Shutter button completely down to take the picture.

note:

Framing marks do not appear in all modes. When you use AF Zone and set Center Zone, the framing marks are fixed at Center Wide. Multiple framing marks may appear when faces are detected in Auto mode ( ).

Previous Next