Kodak EasyShare M1063/MD1063/MX1063 digital camera — Extended User Guide

The computer does not communicate with the camera.

• Turn on the camera (see Turning on the camera).

• Make sure the battery is fully charged (see Charging the battery).

• Connect the USB cable to camera and computer port (see Transferring pictures with the USB cable).

• Install the software (see Installing the software).

• Disconnect the USB cable. Close all software applications. Re-install the software (see Installing the software).

• Disconnect camera from the computer. Close all software applications, reconnect camera.

Cannot transfer pictures.

(The Add New Hardware Wizard cannot locate drivers.)

• Disconnect the USB cable. (If using camera dock or printer dock, disconnect cable and remove camera from dock). Close all open applications. Re-install the software (see Installing the software).

• Disconnect the USB cable. Close all software applications. Re-install the software (see Installing the software).

• Reboot the computer.

• Try another computer.

Slide show stops or does not run on an external video device.

• Adjust the camera Video Out setting NTSC or PAL ( ).

• Make sure the external device settings are correct. (See the device's user's guide.)