KODAK EASYSHARE M320 Digital Camera — Extended user guide

Table of Contents > Doing more with your camera > Using the self-timer

4 Doing more with your camera

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady Shutter button press. Place the camera on a tripod or flat surface.

1. In any picture-taking mode, press the

button to choose.

10 seconds - A picture is taken after a 10-second delay (so you have time to get into the scene).

2 seconds - A picture is taken after a 2-second delay (for a steady, shutter release on a tripod).

2 shot - The first picture is taken after a 10-second delay. A second picture is taken 8 seconds later.

2. Compose the scene. Press the Shutter button halfway, then completely down.

The camera takes the picture/pictures after the delay.

NOTE:

In Panoramic modes (Taking panoramic pictures), only the 2- and 10-second options are available.

Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button completely down.

Previous Next