Kodak ESP 9 All-in-One Printer — User Guide


Table of Contents > Handling Paper > Loading originals

4 Handling Paper

Loading originals

Loading an original for copying or scanning

To copy or scan a document or photo, place your original directly on the scanner glass, print side-down, against the silver arrow on the right-front corner or in the automatic document feeder (ADF).

Loading an original for faxing

WARNING: If photo paper is loaded into the automatic document feeder for copying or faxing, a paper jam results. Do NOT use the automatic document feeder for scanning.

If the original is more than 11 inches (279 mm) long, you can pull the tray extender all the way out to keep the original flat.

  1. Place the original (plain paper only) print side up into the ADF

    NOTE: If you are faxing only one page or if you are faxing anything printed on photo paper, you can place the original on the scanner glass. See Loading an original for copying or scanning.

  2. Align the paper edge guides with the edges of the paper to center the original in the ADF tray.



Previous Next