KODAK EASYSHARE Z950 Digital Camera — Extended user guide
Table of Contents >
Using the menu button > Using the Capture + menu
4 Using the menu button
Press Menu, , , and OK to access settings
|
Capture + Options
|
White Balance
Choose your lighting condition.
Available only in PASM and Panorama modes.
|
|
|
|
Auto - automatically corrects white balance. Ideal for general picture taking.
Daylight - for pictures in natural lighting.
Tungsten - corrects the orange cast of household light bulbs. Ideal for indoor pictures under tungsten or halogen lighting without flash.
Fluorescent - corrects the green cast of fluorescent lighting. Ideal for indoor pictures under fluorescent lighting without flash.
Open Shade - for pictures in shade in natural lighting.
|
|
Exposure Metering
Evaluate light levels at specific areas of a scene.
Available only in PASM and Panorama modes.
|
|
|
|
Multi-pattern - evaluates lighting conditions throughout the image to give an optimum picture exposure. Ideal for general picture taking.
Center-weighted - evaluates the lighting conditions of the subject centered in the LCD. Ideal for backlit subjects.
Spot - similar to Center-weighted, except the metering is concentrated on a smaller area of the subject centered in the LCD.
|
|
AF Zone
Select a large or concentrated area of focus.
Available only in PASM and Panorama modes.
|
|
|
|
Multi-zone - evaluates 5 zones to give an even picture focus. Ideal for general picture taking.
Center-zone - evaluates the small area centered in the LCD. Ideal when precise focus of a specific area in the picture is needed.
|
|
Exposure Bracketing Interval
Choose the difference in exposure compensation while using exposure bracketing.
Available only in PASM modes.
|
Off
+/- 0.3 EV
+/- 0.7 EV
+/- 1.0 EV
See Using exposure bracketing.
|
Sharpness
Control picture sharpness.
Available only in PASM and Panorama modes.
|
High
Normal
Low
|
Previous
Next