KODAK Zi8 Pocket Video Camera — Extended user guide

• Low battery. Charge the battery.

• Card or internal memory is nearly full. Transfer videos/pictures to your computer.

• Corrupt or unusable card. Transfer videos/pictures to your computer, then format (erase) the card in the camera or card reader.

• Internal memory is full. Transfer videos/pictures to your computer, or use an SD/SDHC card to take more videos/pictures.

• Card is full. Transfer videos/pictures to your computer or use another card.

• Unrecognized file. Transfer videos/pictures to your computer.

• An error has occurred. Transfer videos/pictures to your computer, then format (erase) the card or internal memory.

Camera will not turn on.

• Ensure that the battery is correctly inserted and charged.

Videos are choppy or jumpy when played on a computer.

• Use ARCSOFT MEDIAIMPRESSION Software for video playback.

• Ensure that the computer system requirements are met. Go to www.arcsoft.com/support.

Videos are blurry.

• Check the Landscape/Macro focus button (Adjusting the focus range).

• Ensure that the lens is clean.

• Ensure that the subject is at least 1 m (3.3 ft) from the lens.

• Turn on Image Stabilization (Accessing the settings menu).

• When using a tripod, turn off Image Stabilization.

Videos do not play on a TV.

• Ensure that an HDMI or AV Cable is properly connected directly to the TV input (Viewing on a TV).

• Ensure that the TV menu settings are correct for an HDMI or AV connection.

• Ensure that the Video Out is set correctly (Accessing the settings menu).

Videos are in low resolution and/or are not saved.

• If no card is inserted and the camera is powered by the AC adapter, then videos are taken in low resolution and are not saved. (The camera is in Demo mode.) Insert a card or unplug the AC adapter.

Camera will not work with optional remote control.

• Ensure that the battery is correctly inserted in the remote control and camera.

• Ensure that the battery is correctly inserted in the camera.

• Ensure that the camera infrared receiver (above the lens) and the remote control have an unobstructed path.

Solve problems with ARCSOFT Software.

• Go to www.arcsoft.com/support. (For other applications, go to their support sites.)