Kodak ESP 5 All-in-One Printer — User Guide


Table of Contents > Viewing and Printing Photos > Zooming and cropping photos

4 Viewing and Printing Photos

Zooming and cropping photos

Your printer enables you to zoom in or out on a specific area of a photo. When you print the photo, the photo is cropped so only the area shown on the display is printed.

NOTE: The changes you make to the photo apply only to viewing and printing the photo, and will not be saved on the memory card or storage device.

  1. Select an image from the display. As needed, see Printing photos from a PictBridge camera, or Printing Photos from Other Cameras, Memory Cards, and Portable Storage Devices

  2. Press Zoom + to enlarge the photo in .25X increments, up to a 5X magnification. Press Zoom – to decrease the magnification in .25X increments, to 1X.

  3. Use the , , and navigation buttons on the control panel to display the part of the picture you want to print.

  4. Press OK when finished. The photo is displayed with a border ("crop box") around the magnification and position you selected.

  5. Press Menu and press to select the Print Photos Options menu; then press OK.

  6. Press and select Quantity, and then press to select the number of prints.

  7. Press Start to print the area displayed in the crop box.

    Tip: You can make more precise zoom and crop adjustments to your photos on your computer using photo editing software. To send a photo from the All-in-One to your computer, see "Transferring Images From the Printer to a Computer" below.

Transferring Images From the Printer to a Computer

You can transfer .jpg, .mov, and .wav files to your Windows or Macintosh computer from a PictBridge camera, digital image-transfer (PTP) camera, memory card, Kodak Bluetooth dongle, and portable (USB) storage drive connected to this All-in-One printer.

NOTE: To transfer large files, such as video files, from a memory card to a computer, Kodak recommends using a card reader attached directly to the computer instead of transferring the file(s) via the All-in-One printer. Likewise, Kodak recommends transferring large groups of image files (400 or more) stored on a memory card to a computer via a card reader connected to the computer.

Transferring images to a Windows computer

  1. Connect the plug-and-play device to the appropriate slot on the front panel of your printer.

  2. Press Menu to display the Print Photos Options menu in the screen.

  3. Press until Transfer All to PC is selected, and click OK.

  4. At the prompt, click Start. The Kodak All-in-One Printer Software dialog opens on the PC monitor.

  5. In the Kodak All-in-One Printer Software dialog on your PC, click an option to select it:

    • Browse and print my pictures

    • Transfer my pictures

    • Both

    Then click OK.

  6. If the Kodak Home Center software opens on the desktop, follow the instructions in the to complete the transfer.

  7. If the Select Device dialog displays on the PC monitor, select the All-in-One printer as the location of the image file(s), and then click OK. Follow the instructions in the Windows Scanner and Camera wizard to complete the transfer.

  8. From the dialog, select Transfer my pictures and click OK.

  9. Follow the instructions in the Windows Scanner and Camera wizard to complete the transfer.

Transferring images to a Macintosh computer

  1. Connect the plug-and-play device to the appropriate slot on the front panel of your printer.

  2. Press Menu to display the options on the computer monitor (for a PictBridge camera) or the printer screen (all other devices).

  3. Press until Transfer All to PC is selected.

  4. Press OK .

  5. When a transfer or connection message appears on the monitor, click Yes.

  6. Press Start.

  7. Use iPhoto or Image Capture to complete the transfer.



Previous Next