Kodak ESP 3 All-in-One Printer — User Guide
Table of Contents > Handling and Loading Paper > Loading the Paper tray
3 Handling and Loading Paper
Loading the Paper tray
You can load the Kodak ESP 3 All-in-One printer with various types of paper ranging from 3-to-8.5 inches wide and from 5 to 14 inches long. The tray capacity is 100 sheets of 20 lb plain paper. You can also load labels and transparencies.
NOTE: | To avoid fingerprints, handle photo paper by the edges and avoid touching the glossy side of the paper. |
-
Pull the paper tray all the way out until the paper guide flips up on the right side.
-
Slide the paper-width guide to its left-most position.
-
Align the edges of a stack of paper.
-
Insert the stack of paper into the paper tray with the print side down.
-
For paper less than 8.5 inches wide, squeeze the paper-width guide and slide it to the right until it lightly touches the stack of paper.
-
Leave the paper tray open when paper is loaded.
-
Before printing, pull the output tray extender all the way out and pop up the paper stop.
Previous Next