Kodak ESP 3 All-in-One Printer — User Guide

Table of Contents > Handling and Loading Paper > Loading envelopes

---

3 Handling and Loading Paper

Loading envelopes

You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer.

IMPORTANT:

Do not load envelopes with cutouts or cellophane windows in this printer.

1. Remove any other paper from the paper tray.

2. Insert one or more envelopes into the right side of the paper tray with the print side down and the envelope flaps on the right, pointing left.

   

3. Squeeze the paper-width guide and move it to its right-most position up against the envelopes.

4. Leave the paper tray open while the envelopes are loaded.

Previous Next