Kodak ESP 3 All-in-One Printer — User Guide
Table of Contents > Print > Transfer Pictures to Computer
4 Print
Transfer Pictures to Computer
After you take pictures with your digital camera, you can transfer them to the computer and print them on your ESP 3 All-in-One printer. You can transfer .jpg, .mov, or .wav files to your computer from PictBridge cameras, memory cards, and USB mass storage devices.
|
WARNING: Do not attempt to remove a memory card from a slot while it is being accessed. Doing so can damage files on the card. You can safely remove a card only when the memory card status light is not blinking. |
Transfer to a Windows computer
To transfer pictures from a PictBridge camera
-
On the front printer panel, connect a PictBridge camera to the USB port. The KODAK All-in-One Printer Software dialog open on the PC monitor.
-
On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK.
-
Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the instructions in the Scanner and Camera wizard to complete the transfer.
To transfer pictures from a memory card
-
On the front printer panel, insert a memory card into one of the memory card slots. The KODAK All-in-One Printer Software dialog open on the PC monitor.
-
On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK.
-
On the Select Device dialog, select the device you want to use and click OK.
-
Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the instructions in the Scanner and Camera wizard to complete the transfer.
To transfer pictures from a USB storage device
-
On the front printer panel, insert a USB storage device into the USB port. The KODAK All-in-One Printer Software dialog open on the PC monitor
-
On the KODAK All-in-One Printer Software dialog, select Transfer my pictures and click OK.
-
On the Select Device dialog, select the device you want to use and click OK
-
Complete the file transfer with Kodak EasyShare. If Kodak EasyShare is not installed, follow the instructions in the Scanner and Camera wizard to complete the transfer.
Transfer to a Macintosh computer
To transfer pictures from a PictBridge camera
-
On the front printer panel, connect a PictBridge camera to the USB port.
-
When a transfer or connection message appears on your computer monitor, click Yes
-
Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer, use iPhoto or Image Capture to complete the transfer
To transfer pictures from a memory card
-
On the front printer panel, insert a memory card into one of the memory card slots.
-
Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer, use iPhoto or Image Capture to complete the transfer.
To transfer pictures from a USB storage device
-
On the front printer panel, insert a USB storage device into the USB port.
-
Complete the file transfer with Kodak EasyShare. If EasyShare is not installed on your computer, use iPhoto or Image Capture to complete the transfer.
Previous Next