Kodak ESP 3 All-in-One Printer — User Guide
Table of Contents > Kodak ESP 3 All-in-One Printer Specifications > Safety Specifications
9 Kodak ESP 3 All-in-One Printer Specifications
Safety Specifications
-
Read and follow these cautions and warnings before using Kodak products.
-
Always follow basic safety procedures.
-
Follow all warnings and instructions marked on the Kodak ESP 3 All-in-One printer.
Parts
|
CAUTION: Do not disassemble this product; there are no user-serviceable part(s) inside. Refer servicing to Kodak's qualified service personnel. |
|
|
WARNING: Keep out of reach of children. Ink may be harmful if swallowed. |
Power
|
|
CAUTION: If the power cord or plug is frayed or damaged, the equipment gets wet, or the equipment does not operate normally when the operating instructions are followed, unplug your printer from the power outlet and have qualified service personnel service your printer. |
|
|
CAUTION: The alternating current (AC) adapter power supply is equipped with a three-wire grounding type plug. If you cannot insert the plug into the power outlet, contact an electrician to check or replace the power outlet. |
|
|
CAUTION: For added protection from damage during a lightning storm, or when your printer and its associated alternating current (AC) adapter are unused for long periods of time, unplug the AC adapter from the power outlet. |
|
|
WARNING: Pushing objects through the equipment openings can result in an electric shock or fire. |
|
|
CAUTION: Do not plug the alternating current (AC) adapter into a household extension cord. |
|
|
WARNING: The use of an accessory not recommended by Kodak could cause fire, an electric shock, or injury. |
Location
|
|
CAUTION: To prevent your printer from overheating, do not block or cover the slots and openings in the equipment, place it near a heat register, or install it in a cabinet without proper ventilation. |
|
|
CAUTION: Do not use your printer near water, or spill liquid on it. |
|
|
WARNING: Do not place your printer on an unstable cart, stand, bracket, or table; this risks damaging the equipment and injuring people. |
Environment
|
|
CAUTION: Excessive dust levels may damage internal parts. |
|
|
CAUTION: Unplug the equipment from the electrical outlet before cleaning. |
|
|
CAUTION: Dropping your printer may damage the housing and result in extensive damage that will require replacement or repair by a qualified technician to restore normal operation. |
|
|
WARNING: Do not expose this product to liquid, moisture, or extreme temperatures. Kodak alternating current (AC) adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. |
|
|
CAUTION: Adjust only those controls covered in the user guide or setup instructions. |
For more information, go to www.Kodak.com/go/MSDS
Previous Next