KODAK ESP 3200 Series All-in-One Printer — Includes Information for the: ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer


Table of Contents > Copying > Adjusting copy settings

5 Copying

Adjusting copy settings

You can change the copy settings for individual copy tasks. A few of the common tasks are described below.

Enlarging or reducing a document

To enlarge or reduce the size of your copy:

  1. Lift the scanner lid, and place the document face down on the glass. Note the orientation of the paper on the glass and make sure the paper is flush to the edges.



  2. Close the lid.

  3. Press Home.

  4. If needed, press or to select Copy Document.

  5. Press OK.

  6. Press to select Copy Size.

  7. Press or to select the enlargement or reduction you want.

    NOTE: If you select Fit to Page , the printer detects the size of the original on the scanner glass and the size of the paper in the paper tray, and automatically reduces or enlarges the original so that the copy fits on the paper

  8. Press Start to begin copying.

Enlarging or reducing a photo

To enlarge or reduce the size of your copy:

  1. Lift the scanner lid, and place the photo face down on the glass.

  2. Close the lid.

  3. Press Home.

  4. If needed, press or to select Copy Photo.

  5. Press OK.

  6. Press to select Copy Size.

  7. Press or to select the photo size you want.

  8. Press Start to begin copying.

Darkening or lightening copies

If the original document or picture is too light or too dark, you can make the copy darker or lighter.

To darken or lighten the copy:

  1. Lift the scanner lid, and place the document face down on the glass.



  2. Close the lid.

  3. Press Home.

  4. If needed, press or to select Copy Document or Copy Photo.

  5. Press OK.

  6. Press to select Brightness.

  7. Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

  8. Press Start to begin copying.



Previous Next