KODAK EASYSHARE M530 Digital Camera — Extended user guide


Table of Contents > Doing more with your camera > Using the Setup menu

5 Doing more with your camera

Using the Setup menu

Use Setup to customize other camera settings.

IMPORTANT: Your camera offers a built-in Help system. Getting help from your camera.

Press Menu, to choose Setup, then to access settings More information

Date & Time

Set date and time.

LCD Brightness

Choose LCD brightness during picture/video capture. (During Review, the LCD is set to High Power.)

Auto - LCD brightness is automatically adjusted according to environment.

High Power - Brighter LCD; uses more battery power.

Power Save - Dimmer LCD; uses less power.

Share Button Settings

Choose what is displayed when the Share button is pressed in Review.

Show or hide:

  • Individual social networking sites

  • E-mail addresses (all or none)

  • KODAK PULSE Digital Frames (all or none)

Red-eye Reduction

The Red-eye flash fires automatically before a picture is taken.

Preflash - The flash fires to reduce the chance of red-eye.

Digital correction - The camera digitally corrects red-eye after a picture is taken. (Processing time after taking a picture may increase.)

Orientation Sensor

Orient pictures so that they are displayed with the correct side up.

On - The camera rotates pictures so that all appear in the same orientation on the camera.

On Transfer - The camera rotates pictures when they are transferred to your computer.

Off - Pictures are not rotated.

Camera Sounds

Choose volume, and sound effects for each function.

Volume

Focus Lock

Shutter

Self-timer

Error

Power On

Video Out

Choose the regional setting that lets you connect the camera to a television or other external device.

NTSC - Used in North America and Japan; most common format.

PAL - Used in Europe and China.

Image Storage

Choose a storage location for pictures/videos.

Auto - The camera uses the card if one is in the camera. If not, the camera uses internal memory.

Internal Memory - The camera always uses internal memory, even if a card is installed.

Language

Choose your language.

Reset Camera

Reset settings to their default.

Reset All Camera Settings - Settings revert to their factory defaults.

Reset Startup Application - Resets camera to startup mode to allow KODAK Software download.

Format

CAUTION:
Formatting deletes all pictures/videos, including those that are protected. Removing a card during formatting may damage the card.

Memory Card - Deletes everything on the card; formats the card.

Exit - Exits without making a change.

Internal Memory - Deletes everything in internal memory including email addresses and keyword tags; formats the internal memory.

About

View camera information.



Previous Next