KODAK ESP Office 6100 Series All-in-One Printer — Extended User Guide


Table of Contents > Copying > Copying a photograph

5 Copying

Copying a photograph

You can copy a photograph using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a photograph

The default settings are either the factory default settings (Resetting factory defaults), or defaults that you have set on the printer ().

To copy a photograph using the current default settings:

  1. Place the original photograph on the scanner glass.

  2. Press Home.

  3. Press to select Copy Photo.

  4. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.

Adjusting the settings and copying a photograph

To copy a photograph using settings other than the default settings:

  1. Place the original photograph on the scanner glass.

  2. Press Home.

  3. Press to select Copy Photo, then press OK.

  4. Press to select an option, then press or to change the setting.

    Copy Photo Option Settings Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Copy Size

    2 x 3

    3.5 x 5

    4 x 6 (default)

    4 x 7

    5 x 7

    4 x 12

    8 x 10

    8.5 x 11 or A4

    The printer enlarges or reduces the original to make it the copy size you select.

    If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.

    Plain Paper Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal.

    Draft

    The fastest print speed, but the lowest quality.

    Photo Paper Quality

    Automatic (default)

    The printer detects photo paper in the paper tray and sets Best quality automatically.

    Brightness

    Normal, -3 to +3 (Normal is default)

    Lightens or darkens the copy. Normal is no change from the original; -3 is the darkest; +3 is the lightest.

    Preview

    No (default) / Yes

    To see a preview of the photograph on the LCD, select Yes.

    Save as Defaults

    No / Yes

    To save settings as the new default, press OK , select Yes , then press OK .


  5. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.


Changing the number of copies of a photograph

To change the number of copies:

  1. Place the original photograph on the scanner glass.

  2. Press Home.

  3. Press to select Copy Photo, then press OK.

  4. Make sure Quantity is selected.

  5. Press or to select a number, or use the numeric keypad to enter the number of copies.

  6. Press Start Black to make black-and-white copies, or press Start Color to make color copies.

Enlarging or reducing a photograph

To enlarge or reduce the size of the copy:

  1. Place the original photograph on the scanner glass.

  2. Press Home.

  3. Press to select Copy Photo, then press OK.

  4. Press to select Copy Size.

  5. Press or to select the copy size.

  6. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.

Darkening or lightening a copy of a photograph

To darken or lighte n the copy of the photograph:

  1. Place the original photograph on the scanner glass.

  2. Press Home.

  3. Press to select Copy Photo, then press OK.

  4. Press to select Brightness .

  5. Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

  6. Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.



Previous Next