KODAK ESP Office 6100 Series All-in-One Printer — Extended User Guide


Table of Contents > Scanning > Scanning from the control panel

6 Scanning

Scanning from the control panel

To scan a document or a picture from the control panel:

  1. Load the original.

  2. Press and hold Scan for one second.

    The Scan Options menu appears on the LCD.

  3. Press to select an option, then press or to change the setting.

    Scan Option Settings Description

    Scan To

    USB-connected computer (default)

    The scanned file is sent to the USB-connected computer.

    Name of computer (only if a computer is connected by wireless or Ethernet network)

    The scanned file is sent to the computer on the wireless or Ethernet network.

    Scan What

    Document (default)

    Sets the scan settings for scanning a document (Changing the scan settings for scanning from the control panel).

    Photo

    Sets the scan settings for scanning a photograph (Changing the scan settings for scanning from the control panel).

    Destination

    File (default)

    Sends the scanned file in the format and to the location on your computer that you designate (Changing the scan settings for scanning from the control panel).

    Application

    Sends the scanned file to Home Center Software.

    Save as Defaults

    No / Yes

    To save the settings as the new default, press OK. With Yes selected, press OK.

  4. Press Start Black to make a black-and-white scan, or press Start Color to make a color scan.

    The scanned file appears at the destination you specified .



Previous Next