KODAK EASYSHARE Z981 Digital Camera — Extended user guide


Table of Contents > Reviewing and editing > Creating a multimedia slide show

4 Reviewing and editing

Creating a multimedia slide show

Use Multimedia Slide Show to display your pictures/videos on the LCD. You can play all pictures/videos, or select pictures to include in the slide show. You can customize your slide show to include music and your choice of transitions. You can even save a slide show.

NOTE: This feature is available for pictures that reside on a card, not in the camera's internal memory.

Make a slide show that you can save

  1. Press the Review button. Select pictures (see Selecting multiple pictures/videos). If you choose no pictures, all are shown in the slide show.

  2. Press the Menu button. If the Review tab is not highlighted, press .

  3. Press to choose Multimedia Slide Show, then press OK.

  4. Press to choose Preview Slide Show, then press OK.

    Each picture/video is displayed once. To interrupt the slide show, press OK. After the slide show plays, you may save or modify it.

To access your camera's Help system, see Getting help from your camera.

Play a slide show loop

When you turn on Loop, the slide show is continuously repeated.

  1. On the Multimedia Slide Show menu, press to choose Loop, then press OK.

  2. Press to choose On, then press OK.

  3. Press to choose Preview Slide Show, then press OK.

    The slide show repeats until you press OK or until the batteries are exhausted.

Displaying pictures/videos on a television

You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. To connect the camera directly to a television, use an A/V cable (may be sold separately).

Purchase accessories

www.kodak.com/go/z981accessories



NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct ( ). The slide show stops if you connect or disconnect the cable while the slide show is running. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)



Previous Next