KODAK EASYSHARE M590 Digital Camera — User guide
Table of Contents > Product Overview
Attach the strap, load the battery
Charge the battery
Use a microSD/SDHC Card
Your camera has internal memory. We recommend purchasing a microSD or microSDHC Card to conveniently store more pictures/videos.
|
CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card while the camera is on may damage the pictures, the card, or the camera. |
|
Purchase accessories |
Turn on the camera
Set the language and date/time
|
See the Extended user guide |
Take a picture
|
See other modes |
|
|
See the Extended user guide |
Review pictures/videos
|
See the Extended user guide |
Download software, transfer pictures
Download KODAK Software—so it's easy to transfer and share pictures and videos.
| IMPORTANT: | To use the sharing and social networking features, you must download KODAK Software. |
Make sure the computer is connected to the Internet. When you connect the camera to the computer, the KODAK Software Downloader automatically runs. Follow the prompts to download and install KODAK Software.
|
|
|
|
|
1.
Turn off the camera.
|
||
|
2.
Use the KODAK Camera USB Cable, Micro B / 5-Pin to connect camera to computer.
|
|||
|
3.
Turn on the camera.
|
|||
|
4.
After the software is installed, follow the prompts to transfer pictures and videos to your computer.
|
|||
| NOTE: | If the downloader does not run, find and launch it here:
|
|
Download KODAK Software |
Use the camera Help system
Keep learning about your camera!
|
See the Extended user guide |
Front View
Back View
Previous Next