KODAK ESP 9200 Series All-in-One Printer — Extended User Guide
Table of Contents > Copying > Copying a photograph
5 Copying
Copying a photograph
You can copy a photograph using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photograph
The default settings are either the factory default settings (Resetting factory defaults), or defaults that you have set on the printer ().
To copy a photograph using the current default settings:
-
Place the original photograph face down on the scanner glass.
-
Press Home.
-
Press to select Copy Photo.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
Adjusting the settings and copying a photograph
To copy a photograph using settings other than the default settings:
-
Place the original photograph face down on the scanner glass.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select an option, then press or to change the setting.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
Changing the number of copies of a photograph
To change the number of copies:
-
Place the original photograph face down on the scanner glass.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Make sure Quantity is selected.
-
Press or to select a number, or use the numeric keypad to enter the number of copies.
-
Press Start Black to make black-and-white copies, or press Start Color to make color copies.
Enlarging or reducing a photograph
To enlarge or reduce the size of the copy:
-
Place the original photograph face down on the scanner glass.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select Copy Size.
-
Press or to select the copy size.
NOTE: If you select a copy size larger than 5 x 7 in. / 13 x 18 cm, press to select Tray Selection, then press to select Bottom Tray. Make sure that the paper in the bottom tray is the size and type (plain paper, photo paper, etc.) that you want.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
Darkening or lightening a copy of a photograph
To darken or lighte n the copy of the photograph:
-
Place the original photograph face down on the scanner glass.
-
Press Home.
-
Press to select Copy Photo, then press OK.
-
Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
Previous Next