KODAK ESP 9200 Series All-in-One Printer — Extended User Guide
Table of Contents > Scanning > Scanning from the control panel
6 Scanning
Scanning from the control panel
To scan a document or picture(s) from the control panel:
-
Load the original.
-
Press Scan.
The Scan Options menu appears on the LCD.
-
Press to select an option, then press or to change the setting.
Scan Option Settings Description Scan To
USB-connected computer (default)
The scanned file is sent to the USB-connected computer.
Name of computer (only if a computer is connected by wireless or Ethernet network)
The scanned file is sent to the computer on the wireless or Ethernet network.
Memory Card
The scanned file is sent to the memory card in one of the memory card slots.
USB Flash Drive
The scanned file is sent to the flash drive attached to the front USB port.
Scan What
Document (default)
Sets the scan settings for scanning a document (Changing the scan settings for scanning from the control panel).
Photo
Sets the scan settings for scanning a photograph (Changing the scan settings for scanning from the control panel).
Destination
File (default)
Sends the scanned file in the format and to the location on your computer that you designate (Changing the scan settings for scanning from the control panel).
Application
Sends the scanned file to Home Center Software.
No / Yes
To save the settings as the new default, press OK. With Yes selected, press OK.
-
Press Start Black to make a black-and-white scan, or press Start Color to make a color scan.
Previous Next