KODAK EASYSHARE MAX Camera / Z990 — Extended user guide


Table of Contents > Taking pictures/videos > Using the Burst button

2 Taking pictures/videos

Using the Burst button



  1. Press the Burst button until the desired burst icon is displayed on the LCD.

    Burst mode Available in When you press and hold the Shutter button

    Endless Burst

    P, A, S, M, and Smart Capture

    Take pictures until there is no more storage space. (Burst rate varies by mode, picture quality, and picture size. Burst rate slows down after 10 pictures are in the burst buffer.)

    High Speed Burst L

    P, A, S, M

    Take up to 4 pictures @ approximately 4 fps (frames per second).(Picture size varies by mode.)

    Smart Capture

    Take up to 3 pictures @ approximately 2 fps. (Picture size varies by mode.)

    High Speed Burst H

    P, A, S, M

    Take up to 4 pictures @ approximately 9 fps. (Picture size varies by mode.)

    High Speed HD Burst

    P, A, S, M

    Take up to 20 pictures @ approximately 60 fps. (Picture size is 1920 x 1080 pixels.)

  2. Press the Shutter button halfway to focus and set exposure, then press and hold it completely down to take the pictures.

    The camera stops taking pictures when you release the Shutter button, when the pictures are taken, or when there is no more storage space.

    NOTE: The flash is disabled in Burst modes. During quickview, you can delete all pictures in the burst series. Burst is unavailable in Portrait, Night Portrait, Night Landscape, Backlight, Fireworks, and Panorama modes, and when taking pictures in the RAW format.



Previous Next