KODAK EASYSHARE MAX Camera / Z990 — Extended user guide
Table of Contents > Install software > Printing pictures
6 Install software
|IMPORTANT:||To print using PICTBRIDGE Technology, you must change the Computer Connection setting (in the Settings menu) to Other Application ( ).|
You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
Turn off the camera and printer.
Use the KODAK Camera USB Cable, Micro B / 5-Pin (included with the camera) to connect the camera to the printer.
Printing from a KODAK All-in-One Printer
Turn on the printer. Turn on the camera.The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu turns off, press any button to redisplay it.
Choose a printing option, then press OK.
Current Picture - Press to choose a picture.
Tagged Pictures - If your printer is capable, print pictures that you marked for printing.
Index Print - Print thumbnails of all pictures. (This option requires one or more sheets of paper.)
All Pictures - Print all pictures in internal memory or on a card.
|NOTE:||During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see Install software, transfer pictures, and share.|
Purchase cables, accessories
KODAK Gallery (www.kodakgallery.com) makes it easy to:
Upload your pictures.
Edit, enhance, and add borders to your pictures.
Store pictures, and share them with family and friends.
Have prints, photo greeting cards, frames, and albums delivered to your door.
Automatically print tagged pictures when you insert your card into a printer. See your printer user's guide for details.
Make prints at a KODAK Picture Kiosk. Go to www.kodak.com/go/picturemaker.
Take the card to your local photo retailer for professional printing.