KODAK PLAYSPORT Video Camera / Zx5 — Extended user guide
Table of Contents > Using your camera > Using the camera under water
2 Using your camera
Using the camera under water
The camera does not float. To prevent it from sinking, secure it with the strap. (See a floating accessory strap at www.kodak.com/go/accessories.) To keep the camera waterproof, tightly close and latch all doors. Do not open doors in water or when hands are wet. Waterproof integrity may be compromised if the camera is dropped. For more information, .
For the best focus and color balance under water:
-
Press the Settings button
, then choose Underwater Correction. -
Press
to choose the On, then press OK. -
Press the Mode button
, then take videos/pictures. -
When finished taking underwater videos/pictures, go back to Step 1 and turn Underwater Correction off.
After using the camera in water
-
Wipe off water or debris. If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it.
-
If water has entered the camera, remove the card. Allow camera to air-dry for at least 24 hours before using.
|
Keep doors watertight |
Previous Next