KODAK EASYSHARE TOUCH Camera / M577 — Extended user guide


Table of Contents > Taking pictures/videos > Using Program mode

2 Taking pictures/videos

Using Program mode

The Program Scene mode gives access to the greatest number of settings.

  1. Tap , then tap Scene.

  2. Tap Program, then tap Apply.

NOTE: Settings that you change in Program mode apply only to pictures taken in Program mode. Use Reset Camera ( ) to reset Program mode to its default settings.

Changing Program mode settings

In Program Scene mode, tap a setting. Then change its value.

Using exposure compensation to adjust brightness

In Program and Panorama modes, you can adjust exposure compensation before you take a picture to make your pictures darker or lighter. (Only the first picture in Panorama mode can be adjusted—that adjustment is applied to the remaining pictures.)

  1. Tap Exposure Compensation to access the exposure compensation setting.

  2. Drag the slide to increase or decrease exposure compensation.

    The scene in the LCD gets lighter or darker.



  3. Take the picture when you are satisfied with the exposure compensation level.



Previous Next