KODAK EASYSHARE SPORT Camera / C123 — Extended user guide


Table of Contents > Taking pictures/videos > Using the camera under water

2 Taking pictures/videos

Using the camera under water

The camera does not float. To prevent it from sinking, secure it with the wrist strap (see a floating wrist strap at www.kodak.com/go/accessories). To keep the camera waterproof, tightly close and latch all doors. Do not open doors in water or when hands are wet. Waterproof integrity may be compromised if the camera is dropped.

For the best focus and color balance under water:

  1. Press the Mode button.

  2. Press to choose Underwater Pictures or Underwater Videos, then press OK.

  3. When finished taking underwater videos/pictures, go back to Step 1 and choose a non-underwater setting.

After using the camera in water

  • Wipe off water or debris. If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it.

  • If water has entered the camera, remove the card. Allow all components to air-dry for at least 24 hours before using the camera. Care and maintenance.



Previous Next