KODAK ESP Office 2100 Series All-in-One Printers — Extended User Guide


Table of Contents > Faxing > Maintaining Your Printer


10 Maintaining Your Printer


General care and cleaning
Replacing ink cartridges
Replacing the printhead
Updating the software and printer firmware
Monitoring and adjusting printer performance

Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning and copying.

Except while cleaning the printer, keep the printer plugged into an AC power outlet. If you use a power strip, don't turn off the power strip. (The printer does not need to be turned on but should be plugged in.)

Keep the printhead and ink cartridges in the printer at all times to help prevent damage to the printhead.

For recycling and/or disposal information, contact your local authorities. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.



Previous Next